Materials and quality work

Austenitic stainless

• AUS-a

  Austenitic CrNi (19Cr, 9-12Ni), including Nb-stabilised

  • ASTM A351/A743 CF3 (J92700)
  • EN 10283/10213 GX2CrNi19-11 (1.4309)
  • ASTM A351/A743 CF8 (J92600)
  • EN 10283/10213 GX5CrNi19-10 (1.4308)
  • EN 10283/10213 GX5CrNiNb19-11 (1.4552)
  • ASTM A351/A743 CF8C (J92710)

Austenitic CrNiMo, acid-proof

• AMO-a

  316 type CrNiMo (18-20Cr, 9-12Ni, 2-2.5Mo), including Nb-stabilised

  • ASTM A351/A743 CF3M (J92800)
  • EN 10283/10213 GX2CrNiMo19-11-2 (1.4409)
  • ASTM A351/A743 CF8M (J92900)
  • EN 10283/10213 GX5CrNiMo19-11-2 (1.4408)
  • EN 10283 GX5CrNiMoNb19-11-2 (1.4581)

• AMO-b

  316 type, SS 23 43

  • SS 14 23 43 SS 23 43 (castings) (2343)

• AMO-c

  317 type, higher Mo (3-3.5 %)

  • ASTM A743 CG-3M (J92999)
  • ASTM A743 CG-8M (J93000)
  • EN 10283 GX5CrNiMo19-11-3 (1.4412)

• AMO-d

  317 type, lower carbon

  • EN 10283 GX4CrNiMo19-11-3 (1.4443)

Superaustenitics

• SUP-a

  Alloy 20 type, high Ni and Cu

  • ASTM A351/A743 CN-7M (N08007)

• SUP-b

  High-Si superaustenitic (CN7MS)

  • ASTM A743 CN-7MS (-)

• SUP-c

  254SMO type (6-7 % Mo)

  • ASTM A351/A743 CK3MCuN (254SMO-typ) (J93254)

• SUP-d

  25-20 type, high Ni without Mo

  • ASTM A351/A743 CK-20 (J94202)

• SUP-e

  654SMO, high-Mo superaustenitic, outside standard

  • Sulzer (kundspec - EJ standard) 4U / Avesta 654SMO (-)

• SUP-f

  Fully austenitic GX2NiCrMoCu25-20-5 (24-26Ni, 19-21Cr, 4-5Mo, Cu)

  • EN 10283/10213 GX2NiCrMoCu25-20-5 (1.4584)

Martensitic

• MART-a

  Martensitic 12-14Cr, low Ni

  • ASTM A743/A487 CA-15 (-)
  • ASTM A743 CA-15M (-)

• MART-b

  CA6NM type (12-13.5Cr, 3.5-5Ni, Mo)

  • EN 10283/10213 GX4CrNi13-4 (1.4317)
  • ASTM A743/A487/A995 CA-6NM (J91540)

Duplex and superduplex

• DUP-a

  Lean and 25Cr duplex

  • SS 14 23 24 SS 23 24 (castings) (2324)
  • ASTM A890/A995 3A (CD6MN) (J93371)
  • ASTM A890/A995 1B (CD4MCuN) (J93372)

• DUP-b

  2205 type duplex (22Cr, 4.5-6.5Ni, 2.5-3.5Mo)

  • ASTM A890/A995 4A (CD3MN) (J92205)
  • EN 10283/10213 GX2CrNiMoN22-5-3 (1.4470)
  • SS 14 23 77 SS 23 77 (castings) (2377)

• DUP-c

  Superduplex 25Cr-7Ni-4-5Mo (5A/CE3MN)

  • ASTM A890/A995 5A (CE3MN) (J93404)

• DUP-d

  Superduplex 25Cr-6-3Cu (1.4517)

  • EN 10283/10213 GX2CrNiMoCuN25-6-3-3 (1.4517)

• DUP-e

  Superduplex with W and Cu (CD3MWCuN)

  • ASTM A890/A995 6A (CD3MWCuN) (J93380)

• DUP-f

  Superduplex, high Ni (2A/CE8MN)

  • ASTM A890/A995 2A (CE8MN) (J93345)

• DUP-g

  Superduplex, highest N (7A/CD3MWN)

  • ASTM A890/A995 7A (CD3MWN) (J93379)

• DUP-h

  Superduplex, highest Cr (1.4469, 26-27Cr)

  • EN 10283/10213 GX2CrNiMoN26-7-4 (1.4469)

Precipitation hardening

• PH-a

  15-5PH type (CB7Cu-2)

  • ASTM A747 CB7Cu-2 (15-5PH-typ) (-)

• PH-b

  17-4PH type (CB7Cu-1)

  • ASTM A747 CB7Cu-1 (17-4PH-typ) (-)

White iron

• WI-a

  Ni-Hard class I

  • ASTM A532 I A (Ni-Cr-HiC) (-)
  • ASTM A532 I B (Ni-Cr-LoC) (-)

• WI-b

  25 % Cr white iron class III

  • ASTM A532 III A (25% Cr) (-)

Carbon steel and 13Cr

• CR13-a

  Unalloyed carbon steel (WCA/WCB)

  • ASTM A216 WCB (J03002)
  • ASTM A216 WCA (J02502)

• CR13-b

  Wear-resistant unalloyed carbon steel (MAT2560)

  • EN 10293 / BS 3100 AW2 (Valmet MAT2560) GE300 / AW2 (1.0558)

• CR13-c

  Heat-resistant 13Cr (MAT5430/CA-40)

  • EN 10295 (Valmet MAT5430) GX40CrSi13 (1.4729)
  • ASTM A743 CA-40 (-)

High-chromium

• HCR-a

  28 % Cr, corrosion resistant

  • ASTM A743 CC-50 (28% Cr) (-)

Manganese steel

• MN-a

  Manganese steel with Cr (11-14Mn)

  • EN 10349 GX120MnCr13-2 (1.3410)

• MN-b

  Manganese steel, high Mn (16-19Mn, Hadfield)

  • EN 10349 GX120Mn18 (1.3407)